Search results

After measuring threads per inch and using a dial caliper I found the size is 1/4-19 bsp I had tap the threads to clean out the rust and the air tubes will bolt back up but I used plugs

Does any one know the size for the inverted flare air tube on the heads I found 4 different sets trying to find out which one to buy?

One of the threads for the pollution control system on the exhaust runner port on the 307 head is mangled up I want to get a tap to clean the threads up does any one know the size tap I would need

On the passenger side of a Oldsmobile 307 block there is a fitting with a vacuum connection what is this for?

I was at the junkyard and found a 1977 Cadillac Seville with a 8.5 and disc breaks has any one used this in there g body. Also a 1991 Chevy caprice wagon and 1990 Cadillac brougham with 8.5 any ideas I forgot my tape measure

81,82,83 the clear white reverse lights

Does anyone know were to buy replacement tail light lenses for a buick regal mine fell apart due to sun damage.

Just like it says i want to get a stead fast column to prevent that but i dont get how they get it started and im wanting to get a brake to keep my car from getting slim jimmed open does anyone know were i can get that

A while back i put a 307 olds motor in my regal when the v6 went out i put a pre computer quadrajet on it so dosent need the connectors on my carb but the distributor isint connected because the computer in regal was for a 3.8 buick so with the distributor not plug in is my motor not gona run...

I know 1 of the plastic tubes runs to a vaccum line and the other connects to the heater control valve can someone help me out just want to make sure if there connected right also sometimes my upper ac/heater vents dont come on and only works on the bottom vents?

What is a metered vacuum li e isthat vaccum at only at idle

Or this one to

What my car should have first pic and what i want to change it to secound or third pic one has a purge valve one dosent what do yall think

I like the one pontiacgp posted so one line to the tank and one to the purge so what purge valve goes with that set up then plug it in to the vacuum line on the carb?

Can someone please post picks on how theres is connected so i can connect mine correctly thanks

I took out my charcoal canster a long time ago and read that helps the smell and save gas also read read a guy hooked up his return line to the tank to his gas filter to fix this problem. i have a non emission carb and the fuel pump is one for a oldsmobile motor that has only two connections not...

I got the fenders hood front header panel do i need the inner fenders and front radiator support to do the swap im pretty sure i need the inner fenders bc the cutty fenders wont bolt on the regal chassis but do i also need the front radiator support also?