Axle tubes shortened, trailing arm mounts added or relocated, and leaf spring perches removed. There may be more to it but these are the basic mods that might be visible on an 8.5 out of a pickup or fullsize car, that was converted to fit in a Gbody.
https://www.summitracing.com/parts/fel-ms90314-2?seid=srese1&ppckw=pmax-vf-fel-pro&gclid=CjwKCAjwxLKxBhA7EiwAXO0R0A-8H-D4mRX-Tu0ipOyE30dJIVc2zAbu_VuL7onFGV_z-wicVVuM1hoCIcMQAvD_BwE
This is what I used last couple times not the 1245 sorry. If the 1245 don't come with the heat port provision you...
They should provide the metal plates with the holes for using the x-over and the ones without. When using an intake without a x-over you don't even need the plates, but I'd suggest using the ones with holes if using the x-over. Without them in there the gasket life is decreased and they end up...
Typically no, but I have before in years past. I run a bead on the front and rear of the lifter valley and kinda seat the "bottom corner ears" of the gaskets in said RTV bead, with intake/exhaust ports lined up. After letting the RTV tack up for 10 min or so. Then, dab a thing bit of RTV around...
I've always used the manifold vacuum port to tune idle air screws. Shouldn't matter to unplug what is running from it. Unplug and use for a direct reading.
Silver top and silver bottom with the dark metallic blue in the middle. The whole interior/jams are blue and the outside appears to have been repainted, but maybe not. It has the H/O factory engine from what I can tell with the 601 heads.
I want to decide on a color for repaint and kinda feel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.