I'm in for this year. Hope to have the buick in paint by then. Amanda is wanting to stay up by where we went to that strombli restaurant. What do you guys think? We would be a little further away, but wouldn't be paying the premium rates for non premium rooms
Not to hijack the thread with my photo but the muncie to me would make the console seem difficult as I believe the shifter is still a little forward to use the console and unless you use a Camaro style shifter that's offset its still over to the drivers side too much
Here's a couple sound clips for you of my car
Pypes 2.5 true duals w/ x and street pro mufflers
80 regal 383 pypes exhaust fast ez efi 2.0: http://youtu.be/fHft1PlztN8
Same setup but violator mufflers
80 Regal w/ 383, pypes violators: http://youtu.be/galtPG150uw
Mark the ones I used were 18mm thread dia. Use a 1/2 drill bit to deepen the inside of the one to accept the O2 sensor. Should look like this pic. BTW depending on brand od sensor you may need to use a bigger dia bit
if you want to use all 4 brakes that would be called foot braking just use the pedal. the whole point of a line lock is to lock the fronts with no backs being used to aid in holding the car in the water box.
Mark not sure what kind of visual inspection you have to pass up there but here in virginia you just have yo have the right equipment. I removed the precast on my 03 s10 and installed a MagnaFlow high flow in place of my factory cat. I was throwing the code for the cat. What I did was take 2...
That first picture is of my car. Def gbody seats as I pulled mine out of a cutlass in the yard and the car next to them had the same seats. I however redid the upholstery.
Tbi likes plenum space so if you can fit the space g9 for it just remember the butterfly and linkage are moved up on the throttle body so you may need a different air cleaner base. I'm running a vic jr. W/ edelbrock drop base and aN all star performance 1/2" air cleaner spacer
Welcome to the muncie club one of the best shifting transmissions ever built. Autogear makes good stuff. I used alot of their stuff in the buildup of my muncie
I run the fast 2.0 and love it. I run it with their fuel system includes reg and fuel line (although do yourself a favor and order 10ft extra as its not enough). Theit fuel line is 3/8 or -6an. I run that with an fittings to a racetronix sending unit with -an fittings. The racetronix unit though...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.